Product:
Synthetic matt filler base coat
Matt sealant paint for interiors. It has a slightly thixotropic appearance in the tin. After application and once it has dried, it has a velvety matt appearance.
- Catalog number
- Commercial line
- Sector
- Type
- Last revised
- COV
- [CH-FF-SSI091]
- CHROMA
- PRIMERS AND TOPCOATS
- synthetic substrates for wood and walls
- Rev.: 4.0 - 14/12/2021
VOLATILE ORGANIC COMPOUNDS EU limit value VOC (Directive 2004/42 EC) Pitture per finiture e tamponature da int/est per legno metallo plastica (Cat A/d) BS 300 gr/lt (2013) Fibronite max contains 300 gr/lt di VOC
Can be diluted with white spirit. It cannot be mixed.
Keep the product at a temperature no lower than 1°C out of direct sunlight. The product, stored and sealed in the original packages, keeps for a period of 2 (two) years.
On surfaces treated with sealers and/or suitable bases, the product covers 6÷8m²/kg for each coat.
The empty jar and washing residue of the used equipment must be disposed of, according to local regulations in force.
The first coat must be diluted at 20% and the second at 15%. It can be sanded. Suitable as a base coat for substrates of wood, chipboard, multi-layer plywood and walls for interiors and exteriors.
In normal temperature conditions (22°C) and relative humidity (60%), the surface is dry to the touch in 3÷5 hours, can be painted over after 24 hours.
Use at ambient temperatures between 5°C and 30°C. Avoid application in case of strong rain, wind and high sunlight.
CYCLE: On new substrates: clean, dust and sand the surfaces to be treated, before applying Fibronite.
On old and already painted substrates: accurately clean the surface, sanding and removing any old flaky paint and if necessary, fill any cracks or imperfections and then apply a coat of Fibronite.
WARNINGS: Mix the product well before use.
- barcodeformatocolore
- 500 ml()
- 2500 ml()
- 15 lt()
- dim. mm(PxLxH)pz.imballo
- 109x109x856
- 165x165x1602
- 292x292x3301
- barcodeformatocolore
- 500 ml()
- 2500 ml()
- 15 lt()
